Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
SENNEBOGEN introduces a dynamic Hybrid Timber Handler 

SENNEBOGEN introduces a dynamic Hybrid Timber Handler 

SENNEBOGEN introduces a dynamic Hybrid Timber Handler

Hybrid technologies are not only on trend, but they can also significantly save energy if used correctly. With the Green Efficiency Drive (GED), SENNEBOGEN has developed a drive technology that represents a hybrid system with a mix of diesel and electric drive.

The GED is an electric travel drive for material handlers, which is particularly useful when the machines are designed for continuous operation, for example in sawmills, timber handling or log yards. The 735 GED saves up to 30% in energy with the same performance. This not only significantly reduces operating costs, but the machine is also more dynamic and quieter.

The Green Efficiency Drive is used where the largest share of energy demand is generated – when driving. Material handlers in particular do quite a lot of driving, which is why there is the greatest potential for savings here.

SENNEBOGEN introduces a dynamic Hybrid Timber Handler 

Energy Recovery via Electric Drive

The system solution, based on Bosch Rexroth components, was jointly developed into a marketable product, and was launched by SENNEBOGEN under the name ‘Green Efficiency Drive’. The Pick & Carry material handler 735 E is the first machine to contain the series production technology for electric travel.

While the machine is moving around the log yard, the diesel engine drives a generator, which generates the necessary electricity for the electric engines.  During deceleration, the electric drive engines act as generators. This means that they supply the auxiliary equipment with the energy required and relieve the diesel engine. The recuperated energy can even be stored for a short time, increasing the drive power.

Another advantage is that the use of modern components in the electrical system reduces heat loss. This can also save engine power for system cooling and achieve higher working dynamics.

SENNEBOGEN introduces a dynamic Hybrid Timber Handler 

Good for Nature and Wallets

Over the entire product life cycle, the 735 GED saves up to 30% energy with the same performance level and therefore saves operating and service costs on a large scale. Rightsizing the engine makes it possible to save on the machine’s consumption and thus also on emissions. Vibrations and noise are also significantly reduced – for pleasant and quiet operation, which relieves strain on people and the environment in the long term.

SENNEBOGEN introduces a dynamic Hybrid Timber Handler 

Impressive handling

Thanks to the electric drive motors, the 735 GED also has outstanding responsiveness when moving off and positioning. This results in a vehicle that can be moved dynamically and precisely, but that is also a pleasure to drive.

Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts

Post source : SENNEBOGEN Maschinenfabrik GmbH

About The Author

Anthony has worked in the construction industry for many years and looks forward to bringing you news and stories on the highways industry from all over the world.

Related posts

Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts