Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Nano-asphalt Binder developed by Swansea University to improve Asphalt Road Pavements

Nano-asphalt Binder developed by Swansea University to improve Asphalt Road Pavements

Nano-asphalt Binder developed by Swansea University to improve Asphalt Road Pavements

A novel and eco-friendly nano asphalt binder has been developed by researchers at Swansea University and the Technical University of Braunschweig.

The product generates a new class of warm mix asphalt (WMA) additive that significantly reduces energy consumption while simultaneously minimizing vapours and greenhouse gas emissions during the production of asphalt mixtures when compared to conventional asphalt, it also works effectively at a large scale.

To achieve net-zero carbon emissions, Highways UK is increasing the adoption of WMA as a standard across its supply chain. When compared to conventional hot-mix asphalts, WMA technologies can provide increased efficiency and reduce carbon production, with CO2 reductions of up to 15%. WMAs are produced at temperatures of up to 40°C lower than ordinary asphalt, therefore, switching to them would save roughly 61,000 tonnes of CO2 each year in the UK, which is the equivalent of reducing 300 million miles of automobile travel.

To address these issues in WMA technology, a team from the Braunschweig Pavement Engineering Centre (ISBS) at the Technische Universität Braunschweig and Energy Safety Research Institute (ESRI) at Swansea University have discovered the potential for engineered clay/fumed silica nanocomposites to be used as an anti-aging binder that can not only serve to reduce temperatures but also overcome significant limitations caused by moisture susceptibility.

Lead researcher Dr Gِoshtasp Cheraghian of the Technical University of Braunschweig said: “The study given fills the technical gap in WMA technology. Our nanocomposite is a cost-effective and non-toxic substance that can have a significant impact on WMA stability.”

Dr Sajad Kiani of ESRI said: “Typically, asphalt binders are susceptible to aging due to heat, air, sunlight, and water, that have a detrimental effect on the pavement quality, reducing durability. We found that the addition of mineral-reinforced particle will not only decrease oxidation and aging of asphalt but also improve road pavement lifespan and decrease asphalt-related emissions.”

Professor Andrew Barron, the Founder and Director of ESRI and the Sêr Cymru Chair of Low Carbon Energy and Environment at Swansea University, said: “Compared to commercial materials, our solution requires lower concentrations (less than 0.3 wt.%) of additives due to their superior surface activity, and as such has the potential to solve some of the challenges associated with, less durable the roads.”

Dr Cheraghian summarises: “Our results on the molecular interaction between nanoparticles and asphalt binders could pave the way for novel nanotechnology applications in asphalt engineering.”

Goshtasp Cheraghian/ Technical University of Braunschweig. The distribution of clay/fumed silica nanocomposites on the surface of binders at the nanoscale.
The distribution of clay/fumed silica nanocomposites on the surface of binders at the nanoscale. Image by Goshtasp Cheraghian/ Technical University of Braunschweig.

The article can be read in the Nanotechnology Reviews.

Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts

Post source : Swansea University

About The Author

Anthony has worked in the construction industry for many years and looks forward to bringing you news and stories on the highways industry from all over the world.

Related posts

Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts
Content Bottom Adverts